Want to flash the firmware file on your iTel SA633 W7001, then you are in the right place. In this guide, you can flash the stock firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as WiFi and Bluetooth issues, unbrick your device, resolve lag or bad performance, and also fix any software-related problems.

To flash the firmware file on your iTel SA633 W7001, we are using the SPD Flash tool aka Spreadtrum Flash Tool as this device is powered by Spreadtrum SoC. We have shared all the pre-requisites files to download and install the stock ROM on your device.

Why We Need Stock Firmware?

Stock Firmware or a Stock ROM is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your iTel SA633 W7001. If you are facing any problem with your device, your final attempt will be to re-install the stock ROM. This way, you can restore your device back to stock ROM. This guide will be more useful to those users who always want to try rooting, installing mods, or custom ROM.

How to Flash iTel SA633 W7001 Firmware File

Before installing the firmware file on your iTel SA633 W7001, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Firmware Details:

  • Device Name: iTel SA633 W7001
  • ROM Type: Firmware File
  • Gapps File: Included
  • Tool Supported: SPD Flash Tool
  • Processor: Spreadtrum Unisoc SoC
  • Android Version: 10.0

Pre-Requirements:

  • Supported device: iTel SA633 W7001
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
  • Download Drivers and Tools: Spreadtrum USB drivers, SPD Flash Tool, and Android USB Drivers

Download Flash Files

Instructions to Install: via SPD Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  • Full Data Backup without Root
  • Nandroid Backup via TWRP

That’s it, guys. We hope that you’ve installed the Stock Firmware on your iTel SA633 W7001 device successfully. Feel free to ask in the comments below for any queries.